TurboCAD Mac Forum

Register
 
New TurboCAD Mac 2D/3D Training Essentials

line types
Read 281 times
May 15, 2017, 03:07:46 AM
Line type.

Before, during, after TC-ProV10. I was forgotten to install my European line styleís

Based on a Din norm ---> a hidden line is 3mm. long with a space of 1mm. and a Center line  7mm. long, space 1mm. line 1mm. and space 1 mm.

According to these two specís I have also changed the other line description.
And so I obtain now these line types. see print screen attached.

but I also found a bug.
If you declare in the CADD.LIN file

CUTTING,________ _ _ ________ _ _ ________ _ _ ________ _ _ ________ _ _
A,.190,-.040,.070,-.040,.070,-.0.40

But you got only one long line , a space and one short line. Not the two small lines.
See the print screen  and the CADD file

Logged
As you get older, everything become worse, except for the oblivion, which is getting better and better ...

Beta tester- EazyCNC


* May 15, 2017, 11:57:05 AM
#1
beagle,

Quote
CUTTING,________ _ _ ________ _ _ ________ _ _ ________ _ _ ________ _ _
A,.190,-.040,.070,-.040,.070,-.0.40

There is an error in your line definition. It should be:

A,.190,-.040,.070,-.040,.070,-.040  Your last space is defined as -.0.40 is in error.

Enjoy
Mitch

Logged


May 16, 2017, 12:02:16 AM
#2
thanks.  I overlooked the second. "."

Logged
As you get older, everything become worse, except for the oblivion, which is getting better and better ...

Beta tester- EazyCNC